Basic Structure and Characteristics of LNG Cryogenic Liquid Transport Semi-Trailers

Feb 10, 2026 Leave a message


LNG low-temperature liquid transport semi-trailers are special semi-trailer equipment specially used for transporting low-temperature media such as liquefied natural gas. With high thermal insulation, high sealing and high safety, their structural design and manufacturing process directly determine transportation efficiency and operational safety.

 

1. Basic Structure of LNG Low-Temperature Liquid Transport Semi-Trailer

info-800-800


1. High-vacuum multi-layer winding insulation interlayer
As the core insulation structure, this interlayer effectively blocks external heat from entering the tank, reduces heat radiation and heat conduction, and keeps LNG in a low-temperature liquid state.

2. Inner tank container
Used to directly fill LNG low-temperature liquid. Made of special low-temperature resistant and high-strength materials, it provides excellent low-temperature stability and pressure-bearing capacity.

3. Outer tank container
Works with the inner container to form a closed vacuum interlayer space, provides stable external structural protection for the insulation layer, and supports the whole tank body.

4. Pipeline system
Mainly used for loading and unloading LNG low-temperature liquid. Equipped with special low-temperature valves, joints and pipelines, it ensures safe and fast medium transfer.

 

2. Core Insulation Structure and Key Technologies

info-800-800


1. High-vacuum multi-layer insulation layer
It is made of glass microfiber high-efficiency cryogenic insulation material and glass fiber composite winding, which is the key guarantee of the vehicle's insulation performance.

2. Vacuum control and adsorption device
- Molecular sieve adsorbent is installed on the cold side close to the inner container to absorb gas released from materials in the vacuum interlayer.
- Palladium oxide adsorbent is installed on the hot side close to the outer container to absorb hydrogen penetrating into the interlayer.

 

3. Tank Manufacturing and Vacuum Maintenance Process


1. Gas replacement treatment
A large amount of non-condensable gas remains in the multi-layer insulation space. CO₂ gas replacement is required in production to improve interlayer cleanliness.

2. Heating-assisted desorption process
After filling CO₂, heating is applied to accelerate the desorption of adsorbed gas and further ensure stable interlayer vacuum and long-term performance.